Contact us through our contact page or at [email protected]
Showroom: Drumul Lunca Corbului 2, Sector 3, Bucharest, Romania
On a fourth-generation Hyundai Tucson (NX4) with flush roof rails, we fitted a set of Menabo Lince Silver XL roof bars. The fitting was done in the SuportBicicleta.ro showroom, which you can now find at Drumul Lunca Corbului 2, Sector 3, Bucharest, Romania.
In brief
- Car: Hyundai Tucson NX4 (from 2020), 5-door compact SUV with low flush roof rails integrated in the roof.
- Fitted: Menabo Lince Silver XL aluminium roof bars, with a fitting kit for the Tucson NX4 2020+.
- Capacity: the bars carry a maximum of 90 kg, and Hyundai gives a maximum of 100 kg for the Tucson NX4 roof rails, evenly distributed.
- Fitting: the feet tighten onto the roof rails with the Allen key from the package, with no other tools, and lock with a key.
About the car: Hyundai Tucson NX4 (fourth generation, from 2020)
The Hyundai Tucson NX4 was presented on 15 September 2020 and uses a shortened version of the N3 platform, the same one the Santa Fe sits on. In Europe the short-wheelbase version of 2,680 mm is sold, assembled in the Czech Republic at Nosovice, and the front can be recognised by the jewel-effect grille with the daytime running lights integrated into it. In December 2023 the facelift came, for model year 2025.
For roof bars, the most important detail is the type of roof. The Tucson NX4 in this fitting has low roof rails integrated in the roof, so we used a kit that attaches directly to them, not to the bodywork. The Hyundai manual for the Tucson NX4 lists a load of 100 kg for the roof rails, evenly distributed, with the advice to drive slowly, to turn carefully and to check the fixing of the load often.
What we fitted on this Tucson NX4
We chose the Menabo Lince Silver XL roof bars for Hyundai Tucson NX4 2020+, an aluminium set with an aerodynamic wing-shaped profile and an 8 cm section. The shape of the bar helps reduce noise and drag, and the bars are TÜV and ISO/PAS 11154:2006 approved.
Along the full length of each bar there is a 20 mm T-track for T-bolt fittings, so roof boxes, bike racks, ski racks or a kayak carrier can be fitted on them later. The package contains 2 bars, 4 feet for roof rails, 4 locks with keys and an Allen key.
Video: Menabo Lince aluminium roof bars, presentation
Technical details and tips
- Dimensions of a Menabo Lince Silver XL bar: length 1,350 mm, height 30 mm, width 80 mm, aluminium, silver.
- The maximum load of the bars is 90 kg, and Hyundai allows 100 kg on the Tucson NX4 roof rails. So the limit you work to for the load on the bars remains 90 kg.
- The weight of the accessory is deducted from the load capacity of the bars: from the 90 kg of the Lince bars you first deduct the weight of the box or racks, and the rest is left for luggage, within the capacity of the box.
- The weight of the Lince bar set also counts towards the 100 kg Hyundai allows on the Tucson NX4 roof rails, not just that of the box and the luggage.
- After fitting, the car is taller: measure the total height with the bars and accessories on the roof before entering underground car parks or garages.
- The product has no PDF instructions on the site, but the fitting manual is included in the package.
Frequently asked questions
Which roof bars fit the Hyundai Tucson NX4 with flush roof rails?
On the Hyundai Tucson NX4 (from 2020) with flush roof rails we fitted the Menabo Lince Silver XL roof bars for Tucson NX4 2020+, which have a fitting kit for roof rails, a 1,350 mm bar and a 90 kg load capacity.
How much weight do the Menabo Lince Silver XL bars carry on the Hyundai Tucson NX4?
The Menabo Lince Silver XL bars carry a maximum of 90 kg. Hyundai gives a maximum of 100 kg for the Tucson NX4 roof rails, evenly distributed, so no more than 90 kg goes on the Lince bars, including the weight of the box or rack fitted.
Are roof bars noisy on the Hyundai Tucson NX4?
The Menabo Lince Silver XL bars have an aerodynamic wing-shaped profile designed to reduce noise, but any accessory on the roof of a Hyundai Tucson NX4 changes the car's aerodynamics. We explained the causes and solutions in the guide Why do my roof bars make noise while driving.
Can the Menabo Lince Silver XL bars be fitted on a Tucson NX4 without roof rails?
No, the Menabo Lince Silver XL kit for the Hyundai Tucson NX4 attaches to the flush roof rails. A Tucson NX4 with a normal roof needs a set that clamps onto the bodywork, and we will help you choose it in our shop.
We are waiting for you in the showroom
If you have a Hyundai Tucson NX4 and want roof bars, you can see them and have them fitted in our shop at Drumul Lunca Corbului 2, Sector 3, Bucharest, Romania. We will show you on the spot the roof bars , where we check that the bars are suitable and help you choose a roof box for them. You can also contact us through our contact page or at [email protected]. contact us through our contact page or at [email protected].
You can also message us on WhatsApp.
Sources: Wikipedia: Hyundai Tucson (fourth generation, NX4) · Hyundai Owner's Manual Tucson (NX4) 2025 - Roof rack · SuportBicicleta.ro guide: Why do my roof bars make noise while driving · product pages on suportbicicleta.ro




Comments